Appliance Type: Stove / Oven / Cooktop

Thermador Professional range with a bad thermostat.
The part # is 00486945
Some of the part #’s that may work are 14-19-866, 14-39-038 or 412888.
Is there a company that rebuilds old thermostats?
What a shame to retire an otherwise perfect range for lack of a part.

Need this for the holiday and it doesn’t seem to be catching and igniting. Help!

Tried to use my self clean and it just flashes “door” and doesn’t work. Wasn’t sure what this means. I closed it and locked it but it does seem a little bit looser than normal. Maybe it’s not latching completely?

After about 20 minutes my oven beeps as if preheated, but according to my thermostat inside it is about 50 degrees too low. Not sure what that means as far as needing fixed or if we have to replace a part? Am hoping it’s nothing major seeing as I still have to host my family holiday party! Help!

Neither element works. I tried broil, bake, etc.

Lite functions inside the oven.

No other sign of power.. Nothing happening.

Need this working for the holidays and would really appreciate some help please! It wouldn’t even bake the cookies we put in.

I’ve been just using my lower but am now thinking I’ll need both in the coming weeks. If somebody could point me in the right direction and give me some information that’d be great.

Is this it’s own element or do I need to replace both on that side? We use it occasionally and I’d like it working again. Thanks for any help.

the display on our stove keep doing this and I don’t live near any repair services that are reputable. What is the problem? I want to fix it myself.

Not sure what specific part would fix this but need to get it working as soon as possible for the holiday.

Error code appeared after a power outage. I was not aware of what they were, so I just unplugged unit and plugged it back in. Later, I realized oven would not light. I did NOT write down the error code. I need to see it again to begin to diagnose problem. Is there someway to make it reappear? It does not show up when I try to start oven.

Is this something I could do myself? Wasn’t sure how to access it.

Some of the buttons on the touch pad work, and others don’t. Is this a faulty front touch pad or the control board behind it? Was thinking about giving it a go myself if possible.

we can’t figure out what the issue is, I think it’s some type of control issue based on what I’ve found online but not sure.

Sometimes it works fine and other days we can’t get it to kick on and heat up

ok. so I goo to repair videos.type in the above model #. click on tech sheet and it won’t give it to me. what am I doing wrong?

since joining this site I’ve given at least 5 model #s and every time it comes up as” no results found.” just now I typed in # kgsa906pssoo which is a kitchenaid gas stove, I don’t understand why I get no results?

Viking Range she wants to convert from NG to LP. Parts are no longer available and no longer even listed. The model number is VGR36-4GDVB. I have not seen the range yet. Is this even worth trying to convert and does anyone have the orifices in old stock for this range? The advise I was given by the Viking distributor was I would have to drill my own which I have not done or know how to do. Thank you

I am replace a control board on a GE wall oven model JGRP16GEP1BG. Problem is the instructions to wire the cooling fans are completely useless, the wiring diagram came with 3 sheets. The first sheet has some useful info on installing jumpers and the bake and broil relays, but the next two pages were from a front load washer on installing a soap dispenser, these were all stapled together! There is a third relay which I will have to do a live test to see what that relay is doing if anything.

looking for the replacement ignitor caloric range RJP363 has original round ignitor.0068016 this was the one ignitor that had the different mounting bracket in the kit to convert it to flat ignitor . this was never converted. There is a flat ignitor replacement but it doesn’t have the brackets in the kit i need 0309150 kit

my husband says that he checked the igniter and it ohm’s out as being fine. He says it seems like the “spark isn’t reaching or big enough to ignite the burner.” Does anyone there know what could be happening here?

I’ve just tried to use my broiler for the first time, even though I’ve had this oven for awhile already, and it doesn’t work correctly. It seemed to preheat, but then when I put my fish in, and set the timer, it seems to have shut off on it’s own. I started it over, did the same thing. Is cooling down and not staying on even though it says it is.

GE Wall Oven Double m#JTP56WD1WW
I replaced the main control board and bake element. The oven calibrated fine, worked for a couple of batches of cookies, now when I set bake to 375, it does not get above 270

GE Stove This model has a pilot light and pilot gets bigger when oven is turned on but the burner does not light.

I need to find parts for Verona through Eurochef. Any help will be greatly appreciated

I have a customer with a Maytag Gas Range, MGR7775WS 2, R10414233. This unit doesn’t have an ignitor but has a spark mule for the lower oven and it doesn’t always light on the first try. Is this something to worry about and is there anything that can be done about it?

In the bottom oven the bake element doesn’t glow, it heats slightly though. The element itself tested good. As it is trying to heat a clicking noise comes from the back. Could this be the thermostat or something in the control panel?

Both the bake and broil elements in the lower oven do not heat up. Any help will be appreciated. I would also appreciate it if any one could send me a schematic or wiring diagram for the subject oven. Thank you.

Power on key pad functions, oven light works. I checked oven sensor, both elements resistance within tolerance. I can hear relays cycling continuously ever 5secs, but elements and oven don’t heat.