Repair Help

We have cleared this drain numerous times and even installed a conductor but it keeps freezing over. Am considering taking a main control board and temperature sensor with me this time just to cover my bases. Do you have those part numbers handy? Thanks.

First time out I cleared the drain pump and hose, there was quite a bit of debris. But I just got a call that it’s leaking again and am considering just taking the pump with me because I’m pretty sure it will need to be replaced. Do you have that part information?

Some of the vegetables are freezing inside, seems to be fine temperature wise most of the time, but noticing it is acting up. I think it may be the fresh food evaporator sensor, but can’t find the part information for it.

any ideas? have you heard of a jig kit

Replaced door lock after power on .after 30 seconds display F1 what F1 means

This sub-zero ice maker is only making a handful of cubes. It’s been not working correctly for a long time. The unit that’s in there is a 4317943 & I’ll be replacing it with the same. But the customer was asking if there was an OEM sub-zero ice maker that should be in there in it’s place? I didn’t think so but wanted to double check with you guys.

Seems to not be getting consistent power and not running. I’m thinking a bad board. Haven’t been out yet to diagnose it. Thoughts?

Refrigerator wasn’t cooling, has ice build up around evaporator. Cleared that and found the temperature sensor or fuse assembly bad. Am having a heck of a time finding the correct replacement part number on my phone, these diagrams are impossible to read on such a small screen. Somebody available to send it over? Would really help me out.

I found the thermal fuse blown and reset it. Seems to be working fine now. Should I just replace it to be safe? Am assuming it will happen again and would save a trip charge for the customer.

I have a call scheduled to run and haven’t worked on many of these, I’m assuming it will be a simple fix, maybe an element, but wanted to know if you had any information on them that would help to familiarize myself? Thanks.

Also have the fridge that isn’t cooling correctly, and the ice maker isn’t producing ice. I removed a ton of ice surrounding the evaporator and am finding that it may need a thermal fuse assembly. Do you guys have the part info there? Would appreciate the time saver, I don’t do many of these.

This washer was quitting mid cycle with an error and not continuing to run. I narrowed it down to the main pcb board but it came up as NLA. Do you guys know of any way to have them rebuilt? Or is there someone I could send it to have it looked at?

I need to find a parts breakdown list or video repair help for this RF263TEAESR Samsung refrigerator.

I’m almost positive this is a water valve but can’t find the schematic breakdown, anyone there have a minute to look it up for me? Thanks.

Thought I had this narrowed down to needing a fill sensor, but when I returned to replace it, the unit was still getting errors. Now I’m thinking flow meter but can’t find the part information. Does somebody there have it?

This unit is not spinning, only runs for about 10 minutes, and then an IE error pops up and it quits. What’s the deal?

The inside seal is getting hot to touch, there’s a rattling noise that seems to be fairly loud, and the icemaker is not making ice. I think it’s all linked to a bad condenser fan motor but was hoping somebody could help me confirm whether that is a good possibility? I advised customer to avoid compressor damage and possible heat hazard unit should be unplugged until repair is completed.

Checked all the usual suspects, found nothing, moving parts are good, supports, belts, idler, etc. I’m sure you’ll know right away but I’m at a loss.

I reset the board and it seems to be working fine now. Should I have replaced it completely or does resetting sometimes do the trick? Would hate to have to keep going back if it happens again. Appreciate you guys always being willing to help me out on here.

Some kind of error lights are coming up the customer said but I’d like to try and take a part with me if possible. Any thoughts?

I’m trying to find the part information on a middle (center) burner electrode kit. I don’t even know if I can replace it without some help getting to it. But if you have some part information that would be helpful.

The ice maker isn’t making cubes, or much of anything except a huge block of ice in the bin. I need to replace the ice maker itself but haven’t done one of these before. I’ll also need the part information if possible.

Keep getting a low water light, and I just cleared a lot of debris from the pump/sump and drain. What would be causing this?

This washer is leaking out the bottom but I can’t find the cause. Checked the pump, drain hose, tub, etc. Can’t find where it’s coming from.

Initially thought it was the bearing, but there’s no squealing. Looked at all the moving parts, they check out. Can freely spin the tub and hear it but it’s much worse when running.

Already have replaced the fresh food evaporator and filter drier, and customer states they are still having cooling issues. I don’t run into many of these and have spent quite a bit of time there, was hoping someone here might have a clue.

I think I’ve narrowed it down to the sump but now can’t find the part information.