When you start the washer all the lights go on, you cannot program a cycle, and the washer starts and has sound, water comes in, not agitating.
- Guest asked 8 years ago
- last active 8 years ago
it makes little humming noise when we use the boost mode everywhere we put the cookware is this normal? or need to be replaced parts ?
- Guest asked 8 years ago
- last active 8 years ago
fast wash which is a 30 minute cycle goes down to zero and then it turns back on again and went to 15 mins cycle…. for the 15 mins cycle then goes through another wash cycle….so the 15 mins wash it went down to zero and everything drained and there is no water in it now so it works on the 15 min cycle and not the 30 mins cycle (wont turn off on 30 mins but shuts off on the 15 min cycle)….for the 30 mins has to shut off manually which then leaves water in the dishwasher
- Guest asked 8 years ago
- last active 8 years ago
Trouble pulling the doors out, Clicking or scraping sound when opening the drawers.
- Don Kopecky asked 8 years ago
- last active 8 years ago
Frozen food being softer due to insufficient cooling, Temperatures in freezer 10-15 degrees Fahrenheit warmer.
- Patrick's Appliance Service asked 8 years ago
- last active 8 years ago
Noise from fan blade striking objects around it.
- James Buchanan asked 8 years ago
- last active 8 years ago
Difficult to move, Wheels making scraping sound when moved.
- David Sutton asked 8 years ago
- last active 8 years ago
Compressor will receive too much power and burn out.
- Harley Clark asked 8 years ago
- last active 8 years ago
Not cooling, Other functions will not operate.
- Curtis Appliance Repair asked 8 years ago
- last active 8 years ago
No water to Ice Maker, Water may not dispense.
- David Sutton asked 8 years ago
- last active 8 years ago
Not cold inside, No airflow through vents, High pitched squealing sound.
- Harley Clark asked 8 years ago
- last active 8 years ago
Cannot change settings, Unit will not cool, Unit has no power, Unit will not stop running.
- T&G Appliance Repair asked 8 years ago
- last active 8 years ago
Physically damaged, Affecting the operation of the door.
- Patrick's Appliance Service asked 8 years ago
- last active 8 years ago
Service wrench symbol illuminated, Dispenser light not turning on, display continually blinks.
- Harley Clark asked 8 years ago
- last active 8 years ago
Washer will not complete delicate cycle just continues to run and run and run customer has stopped it manually and spin it out on rinse and spin.
- dwoods asked 8 years ago
- last active 8 years ago
fill too much water into washer before stopping. It then gives a IE or 1E code. would the problem be in the control board or something else.
- Guest asked 8 years ago
- last active 8 years ago
Error F3 E0, Error F6 E0, Unit will not self clean.
- Curtis Appliance Repair asked 8 years ago
- last active 8 years ago
Error F6 E1 shows on display, Food cooks slowly, Grinding sound from oven.
- James Buchanan asked 8 years ago
- last active 8 years ago
Error F5 E1, Oven will not bake, Clean mode will not work.
- Curtis Appliance Repair asked 8 years ago
- last active 8 years ago
Oven will not heat, Error F3 E0, Error F3 E1.
- Gary Williams asked 8 years ago
- last active 8 years ago
burner will not turn on, burner will not turn off.
- Harley Clark asked 8 years ago
- last active 8 years ago
First complain was that the dryer is making noise. We had complete open in the back of the unit and front to clean.
We put it together and power turns on and no turning the drum at all.
- Guest asked 8 years ago
- last active 8 years ago
