0 votes
11k views

it’s been leaking water for a few months now…and it frost up where once a week, i’ll have to chop off the ice frost. Is that a repair part or do i have to replace the whole ice maker assembly?

  • Don asked 10 years ago
  • last active 8 years ago
0 votes
11k views

GE refrig model: PFSF5RKZAWW that is Dead, no display, no interior lights, no fans, no compressor.
He verified 120 v through emi filter to the main board and inverter but unit will not fire up. Pulled individual harnesses to see if something may have been shorting low voltage but no change. He did change main board and user interface with same results.

  • Guest asked 9 years ago
  • last active 9 years ago
0 votes
11k views

Refrigerator not working at all and displaying SY CE
Installed Main Control Board/Board switch kit w/ harnesses 5303918556
Took out old board, installed new, and nothing..not even error code.
Put customers old board back in, and it displays error code

Assuming I got a defective board, and purchased another one.
Re-installed new board, same thing. Nothing..not even error code.
Put customers old board back in again, and it displays error code.

Researched problem further and found out I may need to replace the board behind display on door
User Control and Display Board 241973712
Went back and installed both new boards, and still machine is not even displaying error code.
Put customers old board back in, with new display board, and error code comes up.
Everyplace I research, anytime this error occurred, tech replaced both of these boards and problem was solved.
We checked all the wiring and connections to all harnesses, and they look good.
Can someone please help me if you have experienced the same problem, and tell me how you resolved this issue?
I’m tempted to buy all new boards AGAIN, but I don’t think I could have received this many defective boards, something else has to be wrong.
Any help will be greatly appreciated, thanks in advance

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
11k views

Hello I am having issues figuring out why this damper will not stay open. Here is everything I know.

Freezer temp reads at 2 degrees.
Refrigerator temp reads at 64 degrees.
The evap fan motor is running constantly.
After power cycling the machine the damper will open for (about) 60 secs and then close.

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
11k views

Samsung RF4267HARS. First I found water in the bottom of the Refrigerator compartment and on the floor under the refrigerator. Now the food in my Flex Drawer is freezing. What should I fix or replace? I have been reading that the heaters are faulty and the drain sensor fails as well. Should I change out both while I am inside there?

  • Scott asked 10 years ago
  • last active 10 years ago
0 votes
10k views

The right door on this refrigerator pops open when the left door is closed first. I replaced the door cam, part #12028505ap but it did not stop this from happening. I have been telling my customers to open both doors and close the left door first in order to insure both are doors are sealed properly. I have not found an answer on the web. Hopefully your repairmen have found a solution.

Thank you!
Mel
My Appliance Repairman Inc.

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
10k views

Need to remove bottom freezer drawer to replace ice maker.

  • Larry asked 9 years ago
  • last active 9 years ago
0 votes
10k views

I have a Whirlpool French Door Bottom Mount Refrigerator. The icemaker has a slow drip out of the front of the icemaker heater cover. The water slowly drips down into the front ice bin. the Ice bin in the front door builds up with ice and eventually the water starts to run out of the opening of the front door and the water and Ice dispenser unit installed on the front door.

How do I stop the water from dripping out of the icemaker front cover?

  • Guest asked 8 years ago
  • last active 8 years ago
1 vote
10k views

Hello, can you send me the tech sheet for this fridge I want to run the test cycle. is there a place I can get this sheet without ask you every time?

  • Guest asked 7 years ago
  • last active 7 years ago
0 votes
9k views

The interior light on fridge and freezer are flashing continuously. Front panel is showing upside down codes. Compressor is not starting. I changed door switch didn’t do nothing.
Can you please send me manual or put me in the right direction on what could be the problem?

0 votes
9k views

hi. this unit is making noise when door is closed. there is ice building up on the evaporator.i seen the pictures on how to install the above insulation kit.but still confused,do the strips of insulation go underneath the drain pan and on the backside of the metal plate behind the evap coils. so that when the coils are back in place the strips cannot be seen.thanks

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
9k views

I Have a Whirlpool Gold French Door Refrigerator
M/N:GX5FHDXVB03 S/N:K02386807 purchased on 6/21/2010.
-The Vertical Mullion Rail (Flipper Mullion) is very warm or even hot to the touch.
-The freezer, set on the warmest setting is too cold.
-The refrigerator is not cold enough.
-After the internal controls for the refrigerator and the freezer are both set to off, the unit continues to sound like it is running. This stops only when it is unplugged.
How should I proceed?

  • PHILIP asked 9 years ago
  • last active 9 years ago
0 votes
8k views

Have a refrigerator with broken wires at bottom of freezer door. This is causing the ice maker not to run. Is a new wire harness available and any info on how to replace.

1 vote
8k views

I would like to know the best way for installing a water inlet valve DA62-04027A
Thank You

  • Guest asked 7 years ago
  • last active 7 years ago
0 votes
8k views

Looking for an idea of why this unit is failing again. This will be the fourth repair on this in two years, and KitchenAid has been useless. Main board has been replaced once, rebuilt once, something about the defroster has been replaced, and the freezer is not working. Again.

Can you tell me how to navigate the menus for diagnostics?

Any help appreciated.

  • Paul asked 9 years ago
  • last active 8 years ago
0 votes
8k views

We have aproblem with this unit. it doesn’t make any ice . We found for sure the one of inlet valve coils is open ,
but the same time we can hear some strange knocking sound from the ice maker .
We never worked on this kind of ice maker before ,it looks kind of strange one for us
Any help would really appreciate

0 votes
8k views

The initial complaint was that the refrigerator is freezing everything so when I showed up there thermistor and everything seem to be OK just a little bit enclosed in snow so I cleaned everything out make sure that leads are good and not shorting and try to reset the fridge but after me full and around with it it started flashing the temperature bars in sequence from left to right. Not sure what’s going on here seems like it’s in program mode but I didn’t put it into program mode all I did was clean the condenser plug everything back in and turn the fridge back on and leave. I figured the flashing would stop I’ve gotten it before when the door was open for too long.. Any suggestions on what I can do to reset the fridge to proper running order at least to over freezing like it was before I got there hah
THE DIAGNOSTIC GUIDE INSIDE ISNT VERY HELPFULL IT CATERS TO BOTH FREEZER AMD REFRIGERATOR VERSION OF THIS UNIT FOR THE MOST PART

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
8k views

Usually, when I OPEN the fridge door I can hear a fan motor stop. I don’t hear it anymore. Now, frost is building in the freezer and on the evaporator coils (not a lot.) Some water drops collecting on top panel of freezer.
Food items are still frozen, but the fridge is not as cold as it should be. Does the evaporator fan have two speeds? One for constant, low-level cooling and another speed for catch-up cooling?

  • John asked 9 years ago
  • last active 9 years ago
0 votes
8k views

I have a Thermador built in refrigerator with a evaporator leak. The unit was built by Kitchen aid. I know the Kitchen Aid evaporator and heat exchanger are 1/2 to 1/3 the price of the Thermador parts. Does anyone know where I can find the Whirlpool part number for these parts or maybe get the equivilant model number.

Thanks
Mark Kelly
Kelly’s Appliance Center

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
8k views

Will not produce ice, Will not dispense water, Ice build up in freezer.

0 votes
8k views
  • Guest asked 7 years ago
  • last active 7 years ago
0 votes
8k views

I have a French door whirlpool fridge that the freezer is not cooling at all. Fresh food section is fine. There is no frost on the evaporator coil. Compressor is running to cool fresh food section.

  • Guest asked 9 years ago
  • last active 9 years ago
0 votes
8k views

helĺo. can you please send me a viodeo on how to replace the filter housing on samsung refrigerator model # RF4287HARS/XAA. THANK YOU

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
7k views

I have the Samsung family hub refrigerator that is not cooling. It has the cameras in the refrigerator section. Do you have any repair videos on this model ?

0 votes
7k views

SAMSUNG RS265 TDWP/XAA – purchased in 2012 .

Problems: no cooling air on the fridge compartment, but freezer has working normally.
The problem details:
o Water drained into and frosted under the vegetable bottom drawer for a couple weeks, stopped.
o Noise from fan was on and off in the following weeks and stopped.
o Now, no more cooling in the fridge compartment.
o I watched the VA video. Do you think the Evaporator Defrost system/heater, sensor, or the main board is needed for my refrigerator? What is the part number I should order on VA website?

I’d like to thank for your help.

  • Linda Bach asked 10 years ago
  • last active 10 years ago
0 votes
7k views

How does one adjust the water fill level on this ice maker? Thank you for your replies.

0 votes
7k views

We went to service a Samsung fridge that is not cooling on fresh or freezer side. Error code displayed as 22 C but we could not find anything with this error code. Compressor is a bit on the warm side but not hot and it does turn on. Evaporator and fan look good as well. Please advise.

  • mytechjoe asked 8 years ago
  • last active 8 years ago
0 votes
7k views

Ice maker is not working I have a reverse osmosis water filter , could this cause my issue ?

0 votes
7k views

27E error code on my refrigerator.

0 votes
7k views

after I replace the main control board , the interface control only flashing PEO 00. I think it need to reset, but I don’t know how.

  • Guest asked 7 years ago
  • last active 7 years ago
Showing 31 - 60 of 3k results