0 votes
3k views

When start button is pushed timer lights up and counts down but nothing else goes on. Do I need a new control panel?

  • Paul asked 12 years ago
  • last active 12 years ago
0 votes
4k views

My washer won’t spin my clothes out enough, they are sopping wet still. I replaced the lid latch thinking it was that from a video I saw, and then was told it may be my control board from someone else, so I’ve done that as well. Really frustrated now, what else do I need to do?

  • Mohammed B. asked 12 years ago
  • last active 12 years ago
0 votes
4k views

I was trying to figure out why my dryer won’t turn. I took the panel off and the belt is still on, it hasn’t broken or slipped off, but the drum doesn’t rotate when on. Any thoughts?

  • Ethan Levvy asked 12 years ago
  • last active 12 years ago
0 votes
5k views

Hello,
My husband is trying to diagnose of our refrigerator is dying. He says the fans seem to be running but it’s not cooling. He’s thinking compressor but I wanted to know what else we could check before deciding to get rid of it or attempt to fix it. Thank you ahead of time.

  • Eden M asked 12 years ago
  • last active 12 years ago
0 votes
4k views

TRIED TO CHECK BAKE ELEMENT. CUSTOMER SAID NOT BAKING GOOD OR GOING INTO SELF CLEANING. HOW TO GET TO IT?

  • Mike Lloyd asked 12 years ago
  • last active 12 years ago
0 votes
5k views

My dishwasher will not start. The lights light up when I choose different functions but it won’t actually start when I press Start. I tried the reset by pushing the High Temp Scrub and Energy Save Dry buttons alternating five times each and the unit will go through the reset. It also drains when I press cancel after resetting. I am not sure how to proceed.

  • Ryen Mullen asked 12 years ago
  • last active 12 years ago
0 votes
3k views

Its is connected to power.no .nothing. need to diagnose

  • Guest asked 12 years ago
  • last active 12 years ago
0 votes
3k views

I have an electric dryer that I can’t figure out. It’s not heating and I initially thought it was the element. I got it apart and checked that, but it seems fine. Then I found a video on here suggesting the thermostat, but that is also coming back fine. What a I missing?

  • Chandler asked 12 years ago
  • last active 12 years ago
0 votes
3k views

I have an odd problem, our duet washer is filling, with hot water only, when completely turned off and not in use. I came down to do laundry and found quite a substantial amount in the tub already. I drained it and did my load, and then checked the next day and same thing. I have a feeling this is also causing our hot water heater to run more than normal since the water is actually warm. Any help is appreciated.

  • Laura O. asked 12 years ago
  • last active 12 years ago
0 votes
4k views

Hello,
I have a fridge that has water accumulating in the bottom and is beginning to not cool. Is the water just condensation? Is this something I could fix myself? I’d love some help with this.

  • Janina Hahn asked 12 years ago
  • last active 12 years ago
0 votes
4k views

dryer noise is getting louder, and high pitched, how can I fix this?

  • Marco K asked 12 years ago
  • last active 12 years ago
0 votes
3k views

I checked coil, freon, fan motor ok, but when compressor come on , only run for 5-7 minutes and shutting off, when temperature still not satisfy, I wait about 25 minutes for the compressor to come on but didn’t come on for the time I was there,, I open my doors so the temperature inside cooler and freezer rise and close my doors back again so maybe the compressor come on but it didn’t,, I know the compressor come on because the cooler is at 34 degrees,, but freezer is not cooling,,there no ice buid up either at coil and my pressure are around 5 psig..text me at 501 472 6531 if u can ,,,,

  • Juan -- Service tech asked 12 years ago
  • last active 12 years ago
0 votes
3k views

Hd & Normal button lights are flashing alternating. Turned breaker on last nite , closed door & it pumped out. Then nothing. Does not run. no response from machine.

  • Rich Wright asked 12 years ago
  • last active 12 years ago
0 votes
5k views

THANKS FOR YOUR HELP on our Frigidaire dishwasher. WE ALREADY FORKED OUT $120 AND REPLACE THE CONTROL BOARD AND THE ERROR CODE IS STILL FLASHING. I GUESS WE NEED TO WORK ON THE TOUCH PANEL OR CONSOLE, HUH? That should do it, right? Is there a video showing how to do this?

CHRIS HIGGINBOTHAM

  • CHRIS HIGGINBOTHAM asked 12 years ago
  • last active 12 years ago
0 votes
3k views

My washing machine when the timer goes to spin,it won’t spin,instead the agitator spin clockwise and anti clockwise like in wash mode while draining the water. When I took my clothes out after spin cycle is over,still water on it.What is the problem of my spin cycle?Thank you very much

Sincerly,

Loremer

  • Loremer Duka asked 12 years ago
  • last active 12 years ago
0 votes
3k views

This washer gets to spin cycle and won’t drain. You can hear hum and burning smell. Most of the time I can rock the machine front to back or visa versa and it will start to drain and spin. The occurrences of this are getting more frequent and it is getting harding to get the machine to start back up by rocking it. Sometimes now have to unplug it for awhile and try. Also it seems easier to get to work if I take clothes out of machine.

  • Larry Lapanowski asked 12 years ago
  • last active 12 years ago
0 votes
10k views

Looking for an idea of why this unit is failing again. This will be the fourth repair on this in two years, and KitchenAid has been useless. Main board has been replaced once, rebuilt once, something about the defroster has been replaced, and the freezer is not working. Again.

Can you tell me how to navigate the menus for diagnostics?

Any help appreciated.

  • Paul asked 12 years ago
  • last active 11 years ago
0 votes
3k views

Hello,
My fridge has a leak somewhere, it doesn’t seem to be much, but I noticed a small amount of water on the one side and am unsure where it’s coming from. It’s no where near the dispenser area so I was hoping it may just be the drip pan? I’d like to get this taken care of as soon as possible because I had hardwood floors installed last year and am worried this has been going on for some time and I didn’t notice. Help!

  • Zara Tanner asked 12 years ago
  • last active 12 years ago
0 votes
3k views

My gas dryer isn’t heating up any longer and everywhere I looked suggested the coils. But when I accessed them and checked them, there weren’t any issues. What should I move on to next? Thermostat?

  • Seth S asked 12 years ago
  • last active 12 years ago
0 votes
3k views

I’m looking for a little direction on what might be happening to my fridge. There’s a lot of frost building up in the back of the freezer on that panel and it’s starting to not cool. It’s done this before and then started working again. The frost diminished and all seemed fine. Now it’s happening again, and it seems to be worse this time. From the videos I watched it seems like it could be a few things. I checked the heater and board last time and again today, they are good. Any way to help narrow this down for me? I’d really appreciate it.

  • Nicholas Lawrence asked 12 years ago
  • last active 12 years ago
0 votes
4k views

My washer wasn’t spinning so I took off the cover and found a broken belt down underneath. I couldn’t find a video with the part number or model and need a little help in figuring out how to install the new one.

  • Roy M. asked 12 years ago
  • last active 12 years ago
0 votes
4k views

I have a frigidaire dryer that no longer heats, my clothes are still wet inside after two cycles. I had a hard time finding the correct replacement part online and there wasn’t a video I could find for my model. Hoping someone can help!

  • Rebecca Nolan asked 12 years ago
  • last active 12 years ago
0 votes
3k views

What is causing this problem? Do you have a video on how to fix this problem on my JCD2389GES side by side refrigerator/freezer serial #16241088AP and what can I expect to be the approximate cost to repair ?

  • judy cruce asked 12 years ago
  • last active 12 years ago
0 votes
4k views

Broiler on oven won’t shut off

  • Steve Hanshaw asked 12 years ago
  • last active 12 years ago
0 votes
3k views

The outer door panel is broken and prevents the door from closing properly. Since the outside panel was broken, it came off easily. Now I am trying to put it back on. What is the best way to put the door back on? It appears the door needs to be disassembled so it will fit around the door hinge.

Thanks

  • Steve McGill asked 12 years ago
  • last active 12 years ago
0 votes
4k views

This is a he machine and unfortunately I used some regular liquid tide detergent. I’ve since ran several cycles with no detergent, he bleach on self clean mode and cleaned the machine with he cleaner. I’ve also ran the diagnostic test and it won’t go past c7. It drains all the water and then tries to agitate for about 10 minutes and then starts to fill back up with water. It does not go past c7 on the diagnostic test. Can this be fixed?

  • Mike asked 12 years ago
  • last active 12 years ago
0 votes
3k views

If the igniter is broken, does the oven still send gas to the burner tube when turned on?  I only ask as it’s not lighting, so I tried to turn it on and light it manually, and apparently there’s no gas coming from the burner tube.  I just want to make sure the igniter is the problem.  Everything else works on the oven – all four top burners and the broiler. which is at the top of the oven.

  • Bill asked 12 years ago
  • last active 12 years ago
0 votes
4k views

I have a Maytag refrigerator with a bottom freezer. The upper unit doesn’t cool. I found a video that shows how to replace the jazz-board which I did. This did not fix the problem. I can hear the lower unit (compressor) running and the freezer works fine. Maytag model number MFF2557HEW.

  • Ted asked 12 years ago
  • last active 12 years ago
Showing 8791 - 8820 of 9k results