Repair Help

THIS IS A VERY LARGE KITCHENAID WITH THE COMPRESSOR ON TOP. THE COMPLAINT IS THAT THE FRIDGE AND FREEZER GET TO WARM. I CHECKED THE AIR DIFFUSOR AND IT WAS OPEN, AND NOTICED THAT THE UNIT WAS IN DEFROST MODE. I HAVE RESEARCHED DEFROST THERMOS AND TIMERS. COULD IT BE THAT THE UNIT IS GOING INTO DEFROST TOO OFTEN? THANKS, TODD FROM NY.

My GE refrigerator is leaking water from the freezer section.

My Kenmore washer is not getting power at all completely unresponsive.

I have not ever ran across the control lock light ever doing this. I unplugged the dryer. It goes back to flashing as soon as I plug it back in. I checked on the cost of the user board and it’s one high priced part. Thank you for all your help.

My whirlpool refrigerator has water leaking down the inside.

My Fisher&Paykel makes the room hot while running & dryer seems to overheat .

My whirlpool dishwasher will not stop running.

The back left burner on my Whirlpool range is not heating.

The door will not stay closed on my Samsung microwave

My Kenmore dishwasher does not always fill with water properly, also has trouble getting dishes clean.

There is ice build up in the bottom in the freezer section of my whirlpool refrigerator.

The control lock light flashes and beeps. The tech sheet does not have anything. I unplugged the dryer in hopes it would reset. No luck. Thanks for your help.

The lid lock just clicks when you start the washer. Every thing checks ok. I even tried a new lock. But it does the same . After an hour I am at roadblock . Actuator is ok. Help!

Have a Whirlpool refrigerator Complaint, was leaking and small ice cubes and water in the fresh food floor.
The filter is in top right of fresh food compartment and the water lines in / out had molded plastic elbow fittings.
Both hoses cracked at the fittings . I replaced with new modified water lines ,now no leaks.
Cust said Icemaker still making very small cubes. { small icemaker mounts in freezer door ).
Anyone have a tech sheet on the icemaker and/or the manual for this refrigerator.

I AM TRYING TO FIND OUT WHY WHEN I PUT TEMPERATURE SELECT TO HOT ONLY COLD COMES IN . I HAVE CHECKED HOSE FOR CRIS CROSS I HAVE TRIED OTHER SETTINGS AND WARM DOESN’T WORK MACHINE IS ABOUT 6 MOS OLD AND WE HAVE ALREADY HAD SERVICE ONCE FOR THIS ISSUE. THE TECH SAID YOU ONLY GET A MIXTURE OF COLD THEN HOT BUT I LET IT FILL ALL THE WAY UP ON HOT AND AM ONLY GETTING COLD. IS THERE A WAY TO FIX THIS ISSUE. I THINK MAYBE TEMPERATURE SELECTOR SWITCH MAY BE DEFECTIVE.

I DID NOT GO ON THE CALL, BUT I WOULD LOVE TO KNOW IF THERE ARE ANY COMMON PROBLEMS WITH THE SAMSUNG DRYERS, AND WHERE TO START LOOKING. THANKS, TODD FROM NY.

Da63-06934a is not the Filter Head assembly.

There is a video with the title “Samsung RF263TEAESR Refrigerator – Leaking water – Filter Head Assembly”, you described the part to be replaced as Da63-06934a. This part is not the incorrect part #.
Da63-06934a is a face template for the front of the water casing not the actual box or casing.
Is there another part number for the Filter Head assembly.

Thanks.

This is a French door model with ice/water in door. Controls on door. Upon arrival freezer was reading 4 and refrigerator 44. Controls were set for those settings. Do not see a damper assembly in fresh food section. Milk on door was frozen and , as well as other things. Looking at parts breakdown, only evaporator in freezer. So other than possibly thermistor or control board, what else is there thanks in advance.

this is Kenmore/lg microwave oven. my question is can a magnetron test good and still be bad?

Has blinking code e68

I have a Sears stove mod. 629.46795892. When power is on the cooling fan comes on within 30 seconds and f1 comes up. And some thoughtfull ass took the tech sheet. Can you tell me f codes and what f1 is. I thought it was the e.o.c. Thanks for all your help.

Complaint was Icemaker overfills and puts water into ice bucket. This is an older refrigerator and the valve was letting very little water into the icemaker and froze the fill cup.

THE COMPRESSOR TURNS ON FOR ABOUT 5 SECONDS THEN MAKES A GROWNING SOUND, THEN CLICKS AND SHUTS OFF. I PULLED OFF THE RELAY AND OVERLOAD. THE RELAY MADE NO NOISE WHEN I SHOOK IT, I ASSUMED IT WAS GOOD. I CHECKED IT WITH MY OHM METER AND IT WAS AROUND 2.6, DOES THIS SOUND RIGHT? ALSO, I PUT MY AMP CLAMP ON THE RED WIRE TO THE COMPRESSOR AND IT WAS PULLING 11 – 12 AMPS BEFORE IT CLICKED OFF. I BELIEVE THE COMPRESSOR IS BAD, ANY GUIDANCE WOULD HELP. THANKS, TODD FROM NY.

Cannot find info on box bag is empty. Comp. was not running when I arrived at house. I unplugged box and plugged it back in. Comp and cond. fan came on and box started to cool. Lady called 4 hours latter . She said it was making ice but the #4 is still flashing and she said the ff is only down to 48. Any idea what the flashing 4 means.

FRENCH DOOR LG FRIDGE ON THE DISPENSOR DISPLAY IT READS ER WHERE THE FRESH FOOD TEMP SHOULD BE AND 1F WHERE THE FREEZER TEMP SHOULD BE.

GOOD MORNING. I HAVE BEEN GETTING CALLS FROM MY LOCAL LAUNDROMAT. CAN ANYONE HELP ME WITH COMMERCIAL WASHERS AND DRYERS? I BELIEVE THE WASHERS ARE CONTINENTAL AND THE DRYERS ARE HUEBSH. I DID REPLACE A BROKEN BELT ON THE DRYER, BUT I DO NOT KNOW IF I WENT ABOUT IT PROPERLY. I UNHOOKED THE MOTOR FROM THE REAR AND TOOK OFF THE OUTER BELT AND SNAKED IT OVER THEN REPLACED THE OUTER. THE DRYER TUMBLED, BUT WHEN LOADED WITH CLOTHING IT DID NOT. ANY HELP WOULD BE GREAT. THANKS, TODD FROM NY.

There is ice build up in the bottom of my whirlpool refrigerator

My Kenmore washer is not getting hot water.

My Kenmore washer will not spin out properly, also agit dog came off of the unit.