Repair Help

I need a tech sheet and service manual for this refrigerator. It has a smart valve. How do I check it?

EVAPORATOR FANS WORKING.
CONDENSER FAN WORKING.
COMPRESSOR IS VIBERATING, ,MEANING IS WORKING.
THE INSIDE TEMPERATURE CONTROL THERMOSTAT IS STABLE – IN THE SETTING.
FREEZER TEMPERATURE SETTINGS AT -1 AND REFRIGERATOR TEMPERATURE SETTINGS 33.
INSIDE LIGHTS ARE ALL ON.
THE DOOR GASKETS ARE SEALED TIGHT.
THE BOTTOM FREEZER IS VERY WARM, AS WELL AS THE TOP TWO DOORS REFRIGERATOR DOORS ABOVE.
THERE IS NO OUTSIDE PROOF/INDICATIONS OF A LEAKING FREON GAS.
THE FOOD INSIDE THE FREEEZER, HAS ALL DEFROSTED.

My fridge light is still on but it is no longer cooling. The digital display for the ice/water is off too.

My fridge Kitchen aid Model ksrs22qfwh01 will not run water or ice thru the door. I also do not know where the water filter is located.

I have a kenmore fridge 970 top freezer that is leaking water inside accumulating on the bottom. From what I have read it could be a plugged drain hole for the freezer portion but I dont know where it is located.

My refrigerator keeps beeping when there is no water filter in it. How do i get this to stop?

Dishwasher door will not close.

On my Maytag dishwasher (mdb7749sab0) the lights don’t come on when I press Start. It won’t start. Happened yesterday and then it worked. Also, it worked again today, but tonight, the problem is back. Press Start and nothing.

I have a Maytag dishwasher that has a red “lock” indicator light that goes on every time i try to set the cycle.

My Jenn Air dishwasher JDB1270AWY has started making a grinding noise during part of the cycle. It is cleaning great and seems to be draining fine. Ideas?

Water under crisp drawers in fresh food section also noticed ice around damper control check for any bulletins there was none also there was no error codes question is why would there be ice around and inside the damper control and what parts may need to be replaced

Kitchenaid built in oven microwave combo KEMS308SSS00. Original call was for a F1E5 error inverter. Inspection of inverter the board was clearly burned in several areas. Replaced inverter board and main control board.

When powered back on got F0E6 lost communication error. Checked all fuses and wires between Appliance Manager Board and microwave user interface. Had to replace manager board. After replacement, F1E5 error came back.

What have I overlooked or done incorrect? I would like to get this running for the family. Thank you.

DW80J9945US getting LC error code. Can you please tell me how to diagnose this? Thanks.

Verona range basically identical to a Bartezzoni. Oven itself is electric and has a thermostat and a large mechanical selector switch. After tampering with it the oven selector it started to work couple days later costumer said it failed to start. Any ideas on how these units operate? Seemed like a basic system and nothing burned or broken but seems to be failing.. thermostat? The large oven started to work after securing the leads on the selector switch.

E01 and F01 coming up on Maytag Maxima front load washer

The freezer compartment is fine but the refrigerator compartment is not cold. Refrigerator runs constantly.

Hello, i have a Whirlpool GW397LXUT06 and my gas oven wont turn on. the stove top ignites and burns fine. the panel works as well beeps and the light turns on and off. however it wont let me set the time or turn on, the button just beeps and if i hit it again it just double beeps. could it be the temp sensor or igniter?

Our oven keeps beeping and showing an F1 I can’t get it to stop

I have a code F03 and E01 showing.

I have a Maytag neptune washer and get the nd error even after I replaced the water pump, the water inlet and the water pressure sensor. The pump is working I can hear it drains the water out but not all of it.

Washer: The power is on but it stopped mid cycle and will not resume. I unplugged and repligged it. Power and lights come on the machine but when I push start button I just hear severlal needs but doesn’t start. It already has water in the tub and just stopped.

E01 and F01 coming up on Maytag Maxima front load washer.

I have a Whirlpool Model GI6SDRXXQ02, Serial # K11191550 Refrigerator that accumulates ice below the freezer section about an 1/8″ thick and then water leaks out onto the floor as the freezer door has frost due to the icing. This just started this year and I have had this Ref. 6 or so years.

MBB1954GW0 Fridge wont cool has power.

My Whirlpool gas range is beeping. I can not shut it off. The screen is showing F 1. Please help.

looking for f6 e02 fault code whirlpool washer WFW94HEXW2 any help appreciated