0 votes
3k views

THIS IS A THREE DOOR REFRIGERATOR. TO TOP SIDE HAS A SIDE BY SIDE DOOR. THEN, THE BOTTOM DOOR, IS THE FREEZER, AND WHERE THE ICE MAKER IS LOCATED.
ON THE TOP DOOR AREA, I SAW LIKE A SMOKE AREA, AT THE VERY TO THE VERY TOP. THE CUSTOMER STATED, THERE HAS BEEN NO FIRE. I ALSO SAW SIGNS OF SMOKE, AT THE BACK SIDE OF THE REFRIGERATOR, BEHIND THIS SAME AREA. THE COMPRESSOR IS RUNNING, THE CONDENSER FAN IS RUNNING, THE EVAPORATOR FAN IS RUNNING. ALL THE INTERIOR LIGHTS IS WORKING. I CHECK AROUND THE COMPRESSORS, FOR POSSIBLE LEAKS. NON WERE FOUND. THE DIGITAL TEMPERATURE CONTROL IS READING: FREEZER: 85 DEGREES, SAME AS THE REFRIGERATOR AREA. WHAT DO YOU THINK, IS THE CAUSE OF NON-COOLING?

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

Refrigerator side coils look good and clean when I was there refrigerator side was about 60° customer said this is been going on for two weeks I’m thinking just to shotgun it and replace main board and refrigerator temp sensor. TECHNICIAN OPINION AND DIAGNOSTIC PAPERS PLEASE.

  • Guest asked 8 years ago
  • last active 8 years ago
1 vote
3k views

Both sections were freezing. I’ve fixed this before and it was fixed by resetting the fridge. PLEASE GIVE TECHNICAL OPINION AND CONFUSING DIAGNOSTIC.

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
4k views

Does Samsung include tech documentation with their top load washers?
A fast track would be great.
I found no videos on WA45H7000AW/A2

Please be advised. In repair help here the tech sheets you sent some for this washer turned out to be a Range Manual?

Thanks for the help.

Dale Stoltz
Quick and Easy Appliance

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

This unit has a new noise when she put larger cookware. It doesn’t makes noise all the cookwares she has.
What part do we need to replace in order to fix this unit? If it is normal, what exponation should we give out?
Are there any suggested cookware we have to use? Do we have to use Thermador suggested cookwares?
Thank you.

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

Samsung Refrigerator Model RF28HFEDBSR/AA-0001 (RF28HFEDBSR/AA0001, RF28HFEDBSR/AA 0001)

Every 3 or 4 weeks ice is appearing inside the freg replaced one sensor at the top on the right side this is where the ice is at also, I replaced the fan inside the pannel also.
I would send a pic but don’t see a place to add an attachment ,the evaporator coils don’t have ice on them just the tube’s going up from it at the top? Sansung repair man said to change the location of the sensor and that would fix this problem by moving it on the tube on the left side were the other two were freezing up at? Did not work, I did not replace the Refrigerator Defrost Heater .Guess thats all I know o yea after 3 or 4 weeks it start to buss or hum from the ice build up I guess so I take it a part and thaw it out good for a few more weeks?
Don

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
4k views

The unit runs fine till the end then it doesn’t drain and the two LEDs blink. If I unplug it eventually it will clear and repeat the same problem. Any Ideas?

  • Guest asked 8 years ago
  • last active 8 years ago
1 vote
4k views
  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

washer will fill with water but after won’t agitate i will turn cycle to drain and spin will drain the water but won’t spin do you have any video for that kind of problem

  • Guest asked 8 years ago
  • last active 8 years ago
1 vote
4k views

This refrigerator is a side by side made by Whirlpool with the ice maker on the freezer door. Has electric eye, also on the freezer door.
Need to know how to make the icemaker run. Do these new style electric eye flash an error code?

0 votes
3k views

I need a video on how to replace the icemaker.

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

PANEL TURNS ON BY ITSELF AND CHANGES SETTINGS, THE MICROWAVE ITSELF DOESN’T TURN ON, BUT THE PANEL JUST DOES RANDOM THINGS. ANY IDEAS?

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
6k views

We attempted to repair this machine but will not respond whatsoever. It will beep when pressing the control panel buttons but will not start the cycle. We reset the stackable and the same thing occurs. We also tried replacing the lid switch and main board with no change. We also attempted to put it into service mode in order to look up the error codes in which the stackable would still not respond. Do you know of anything else that could cause this issue? The stackable will just beep three times which we thought to believe would be the lid switch.

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

No longer making ice sputtering water in door. Replaced water filter. Reset

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

do you have a video for this model?

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
4k views

This kenmore elite is leaking water behind the icemaker. Coming out of upper part

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

Why is there ice build up inside the fridge on back wall, same side as icemaker?

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

Customer says no adjitate.
If you have a manual or advise that would be much appreciated.
Got any videos on this?

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

Thought maybe old fan was working intermittent so I replaced it and lubricated the gaskets but two weeks later snow is back and getting into the fan and cooling poorly. Rest of the coils are nice and frosty so clearly sealed system is ok. Fridge is like 5 years old. The metal defrost thermistor?

  • Guest asked 8 years ago
  • last active 8 years ago
1 vote
3k views

refrigerator stop working and just blink the front control board light come on inside the fridge fan inside is dead compressor is dead any idea help just display 888 888 on panel tanks

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

I replaced the controll pannel using your video on YouTube. When I program it I can enter the program number but it will not save

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

Hi,
Do you guys have any experience with the error code I mentioned above?

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

Hi,
Do guys have any service manual for this unit?

The customer complains that the machine will stop mid cycle and won’t turn back on, My tech took the dryer apart and now the dryer won’t start at all and just make a clicking sound.
Thx

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

Hi,
Do guys have any service manual for this unit?

The customer complains that the machine will stop mid cycle and won’t turn back on, My tech took the dryer apart and now the dryer won’t start at all and just make a clicking sound. any ideas?

Thx

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
2k views

Poor washability.

0 votes
7k views

Will not drain water.

0 votes
7k views

Not drying properly.

0 votes
3k views

Unit will not start.

0 votes
3k views

Over or leak water.

Showing 2491 - 2520 of 9k results